Fostex VM200 - Manual (Page 21)

Data Wheel and Neighboring Keys
VM200 User’s Guide 21
Data Wheel and Neighboring Keys
The Data Wheel is located in the lower-right corner of the VM200.
It enables you to scroll through lists of programs in the Effect and EQ
Libraries. You can also use the Data Wheel to move the cursor left and
right when naming a new effect or EQ program.
[</-1] and [+1/>] Keys
These keys can step through scrollable lists, such as the Effect
Library or EQ Library.
[ENTER] and [EXIT] Keys
You can use the [ENTER] key to execute certain functions, such as
confirming new parameter values, writing to memory, or initializing
the VM200. You can also use it to confirm new parameter settings.
In many cases, if you hold down the [ENTER] key while pressing
another key, the VM200 displays the key’s first function page (as
opposed to the most recently-displayed function page for that key).
Pressing the [EXIT] key usually exits the current operating mode and
displays the CHANNEL EDIT function page.
The following table shows additional [ENTER] key functions.
Press ENTER and... Operation
ON Sets channel fader parameter in selected fader mode to Unity Gain.
Rotary Controls Increases adjustment increment in EFF Edit or EQ Edit mode.
EQ EDIT
VM200 enters EQ Edit mode. (If already in EQ Edit mode, the
parameter being edited will be initialized after confirmation.
SYSTEM Displays the first SYSTEM function page.
MIDI Displays the first MIDI function page.
CH VIEW Displays the first CH VIEW function page.
PAIR/GROUP Displays the first PAIR/GROUP function page.
ROUTING/PHASE Displays the first ROUTING/PHASE function page.
CHANNEL/METER Displays the first CHANNEL/METER function page.
+1/ /-1
DATA
EXIT
ENTER
Use your thumb or finger
to rotate the Data Wheel