Fostex VM200 - Manual (Page 32)

Touring the VM200
32 VM200 User’s Guide
Channel Control Section
The VM200 features nine 60mm motorized
faders.
Faders 1 through 8 are associated with
separate
[ON] , [SOLO] , and [EQ EDIT] keys.
(The Master fader features only [ON] and
[SOLO] keys.)
Faders 1 - 8 and [ON] , [SOLO] , and [EQ EDIT]
keys 1-8 typically control channels 1
through 8. However, they can also control
channels 9 through 16, and 17 through 20,
depending on the channel layer you select
using the Page Select keys. (See the “Fader
function” table below.)
The ninth fader is the Master Fader.
Faders 1 - 8 and [ON] , [SOLO] , and [EQ EDIT]
keys also assign values to various function
page parameters.
You can also use the faders and [ON] ,
[SOLO] , and [EQ EDIT] keys as MIDI control-
lers by setting parameters on the Control
Table function pages, which are displayed
by the Setup
[MIDI] function key.
Faders
The faders control different functions
depending on the Fader Mode you select.
You select a Fader Mode by pressing one of
the keys in the Fader Mode section of the
control surface. The VM200 features seven
fader modes: Channel, Aux 1, Aux2, Aux3,
Aux4, Eff1, and Eff2. (For more informa-
tion, see “[ON], [SOLO], & [EQ EDIT] Keys”
on page 34.)
Faders 1 - 8 typically control the channel
gain; the Master Fader typically controls
the Stereo Buss Master gain.
However, in Fader Mode Aux1 for example,
Fader 1 controls the channel-to-Aux1 Send
gain. In Fader Mode Eff2, Fader 1 controls
the channel-to-Eff2 Send gain, and so on.
EQ/LO
+10
0
-10
-20
-30
-40
-
ON ON
SOLO SOLO
EQ EDIT EQ EDIT
10
2
9
1
18 17
FREQ Q
GAIN
+10
0
-10
-20
-30
-40
-
PAN PAN
Faders