Fostex VM200 - Manual (Page 25)

[PAIR/GROUP] Key
VM200 User’s Guide 25
The S/P DIF function page lets you assign the S/P DIF digital two-track
input to any odd-even pair of channels (e.g., 1&2, 13&14, etc.).
The Ø PHASE function page lets you invert the phase for each of input
channels 1 through 20.
Press a Page Select key to specify Channels 1-8, 9-16, or 17-20.
You can also use the [ROUTING/PHASE] key in conjunction with the
[PAIR/GROUP] key to enter MMC mode. (For more information, see
“MMC (MIDI Machine Control) Send” on page 192.)
[PAIR/GROUP] Key
The [PAIR/GROUP] key displays a sequence of three function pages
that enable you to pair channels, mute groups of channels, or group
faders under the control of a single fader.
The CHANNEL PAIR (CH PAIR) function page enables you to pair any two
odd-even channels using the [EQ EDIT] keys.
The MUTE GROUP function page enables you to create three groups of
channels (Mute Groups A, B, and C) that you can silence instantly.
The FADER GROUP function page also enables you to create three groups
of channels (Fader Groups A, B, and C). Faders in a group can be con-
trolled by a single fader.
Use the Page Select keys to specify Channels 1-8, 9-16, or 17-20; use
the
[EQ EDIT] , [SOLO] , and [ON] keys to apply these functions to spe-
cific channels.
You can also press the [ROUTING/PHASE] key simultaneously with the
[PAIR/GROUP] key to enter MMC mode. (For more information, see
“MMC (MIDI Machine Control) Send” on page 192.)
[CH VIEW] Key
The Channel View [CH VIEW] key displays a sequence of three func-
tion pages that display settings for specific channels, and allow you
to copy channel and EQ settings from a source channel to destina-
tion channels.
The CH VIEW function page lets you view (but not modify) settings for
specific channels.
ROUTING/PHASE Key
Function Pages Includes parameters that enable you to...
1:ROUTING Route input channels 1-20 to ST BUSS, REC BUSS, or ADAT
DIRECT.
2:S/P DIF Assign S/P DIF digital input to any odd-even channel pair.
3:Ø PHASE Invert phase for each input channel.
PAIR/GROUP Key
Function Pages Includes parameters that enable you to...
1:CH PAIR Pair odd-even input channels.
2:MUTE GROUP Create Mute Groups A, B, C
3:FADER GROUP Create Fader Groups A, B, C