Fostex VM200 - Manual (Page 29)

Eff Edit Section
VM200 User’s Guide 29
you may wish to store the EQ settings for future recall.
Pressing the [STORE] key displays the EQ LIBRARY STORE function page.
Use the Data Wheel to scroll through the list to select the location
(program number) where you want to store the new EQ program.
Press the [ENTER] key to display the EQ LIBRARY NAME EDIT function
page, then name the EQ program.
Pressing the [ENTER] key again stores the program in the EQ Library
for future recall.
One way to create a new EQ program is to select the EQ program most
similar to your “target” EQ, then modify various parameters to sculpt
the response curve into shape.
For more information, see “Storing EQ Programs” on page 86.
Eff Edit Section
The Eff Edit section features four keys: [EFF1] , [EFF2] , and [STORE]
and [RECALL] keys for the Effect Library.
[EFF1] and [EFF2] Keys
The [EFF1] and [EFF2] keys in the Eff Edit Section enable you to select
for editing the effect that is currently loaded in effect processor 1 or 2.
Pressing [EFF1] or [EFF2] displays an EFF EDIT function page that
includes parameters related to the current effect.
For example, a Large Hall Reverb effect includes parameters for
Reverb Time, E/R Balance, HPF, LPF, Initial Delay, PreDelay, Room
Size, etc. The 3D Chorus effect includes parameters for Depth, HPF,
and LPF.
Effect Library
The Effect Library stores effects that you can recall.
It features 50 preset effects and effect combinations. You can modify
the parameters for these existing effects to create and store an addi-
tional 50 custom effect programs.
EFF EDIT
EFF LIBRARY
STORE RECALL
EFF2 EFF1
Note: Do not confuse these keys with the keys in the Fader Mode
section of the same name.