Fostex VM200 - Manual (Page 198)

Initializing the VM200
198 VM200 User’s Guide
Initializing the VM200
You can initialize the VM200 to its factory default settings by using
the Initialization function.
You can specify the items you wish to initialize, choosing from the fol-
lowing options:
❑ ALL (all parameters)
❑ SCENE MEM. (Scene Memory)
❑ EQ LIBRARY
❑ EFF LIBRARY
❑ PGM C. TABLE (Program Change Table)
❑ CTRL C. TABLE (Control Change Table)
❑ SETUP
Follow the steps below to initialize the VM200.
1. Press the [SYSTEM] key repeatedly to display the 6: INITIALIZE
function page.
2.
Rotate the EQ/LO Gain control to select the desired item.
Select from the following options:
• ALL (all parameters)
• SCENE MEM. (Scene Memory)
• EQ LIBRARY
• EFF LIBRARY
• PGM C. TABLE (Program Change Table)
• CTRL C. TABLE (Control Change Table)
• SETUP
The selected item flashes.
Note: If you want to reset only the mix settings and retain other param-
eter settings, recall one of the preset scene memories P0, P1, or P2
instead. See the chapter entitled “Scene Memory” on page 147 for more
information.