Fostex VM200 - Manual (Page 133)

Effects Library
VM200 User’s Guide 133
Effects Library
The VM200 stores effects settings as programs in the Effects Library,
which contains 50 Preset programs (0–49) and 50 User programs
(50–99).
The Preset effects programs are designed for specific applications and
instruments, and include numerous reverbs, delays, choruses,
flangers, and combinations. See “Effect Preset Library List” on
page 125 for a table of Preset effects programs.
You can customize the Preset programs, assign each one a name, and
store them as User programs.
You can load effects from the Effects Library to either effects proces-
sor (EFF1 or EFF2).
Editing Effects
You can edit effects programs and then store them as user programs
in program numbers 50–99.
1.
Recall the effect you wish to edit to the EFF1 or EFF2 proces-
sor.
See “Recalling Effects Programs” on page 134 for more informa-
tion on recalling effects.
2.
Press the corresponding [EFF1] or [EFF2] key in the Eff Edit
section.
(If you recalled the effect to EFF1 in step 1, press the [EFF1] key in
this step, etc.)
The VM200 displays the EFF EDIT function page for the selected
effect, and the selected key lights up.
3.
Use the Gain, Freq, and Q rotary controls to adjust the value
of each parameter.
If you wish to store the change, refer to “Storing Effects Programs”
on page 135.
4.
Press the [EXIT] key to return to Channel Edit mode.
All parameters are described in detail in “Effects Parameters” on
page 139.