Fostex VM200 - Manual (Page 183)

Examples: Using Program Change Messages
VM200 User’s Guide 183
Examples: Using Program Change Messages
The following figures illustrate typical ways in which to utilize MIDI
Program Change messages with the VM200.
In the following example, if you are using the Preset Program Change
Table (which appears on function page
3:PGM TABLE2 ), when you send
Program Change 10 from the MIDI keyboard, the VM200 will recall
Scene 10, due to preset assignment.
In the following example, Program Change 33 has been programmed
into a song on the MIDI sequencer and will be transmitted to the
VM200 at the specified point when the song is played.
If you are using the Preset Program Change Table (2), the VM200 will
recall Scene 33, due to preset assignment.
Since the VM200 outputs Program Change messages when scenes are
recalled, you can record “scene recalls” to the MIDI sequencer in real
time.
You can also connect two VM200s via MIDI and recall a scene on the
first VM200, so that the corresponding Program Change message will
be transmitted to the second VM200 recall the assigned scene.
MIDI OUT
MIDI IN
MIDI keyboard
MIDI OUT MIDI IN
MIDI IN MIDI OUT
MIDI sequencer