Fostex VM200 - Manual (Page 69)

Grouping Faders
VM200 User’s Guide 69
rus or drum kit on and off simultaneously during mixdown. You can
group these channels into a mute group.
Three groups are available: Mute Groups A, B, and C.
1.
Press the [PAIR/GROUP] key twice to display the 2:MUTE GROUP
function page.
THE [PAIR/GROUP] key and all [EQ EDIT], [SOLO], and [ON] keys
flash.
2.
Press the [EQ EDIT] keys for the channels you wish to add to
Mute Group A.
The [EQ EDIT] keys light up and the corresponding indicators on the
display turn on (highlight).
In the example above, channels 5, 6, 7, and 8 are assigned to Mute
Group A. (No other channels are assigned to a Mute group.)
3.
Press the [SOLO] keys for the channels you wish to add to
Mute Group B.
The [SOLO] keys light up and the corresponding indicators on the
display turn on (highlight).
4.
Press the [ON] key for the channels you wish to add to Mute
Group C.
The [ON] keys light up and the corresponding indicators on the dis-
play turn on (highlight).
5.
To remove a channel from the mute group, press the corre-
sponding
[EQ EDIT] , [SOLO] , or [ON] key.
The key resumes flashing and the corresponding display indicator
turns off.
6.
Press the [EXIT] key or the [CHANNEL/METER] key to return to
Channel Edit mode.
Grouping Faders
You can group faders 1-8 into Fader groups. This enables you to con-
trol several faders simultaneously using only one fader.
Three groups are available: Mute Groups A, B, and C.
1.
Press the [PAIR/GROUP] key repeatedly to display the 3:FADER
GROUP function page.