Fostex VM200 - Manual (Page 186)

VM200 & MIDI
186 VM200 User’s Guide
Viewing the Preset Control Change Assign Table
The Preset Control Change Assign Table appears on the 5:CTL TABLE2
function page.
Follow these steps to view the Preset assignments:
1.
Press the [MIDI] key five times.
The VM200 displays the 5:CTL TABLE2 function page.
2.
Select a Control Change number.
Rotate the EQ/LO GAIN rotary control to select from 0 through 95
or 102–119.
As you turn the control, the CTL CHG No. parameter changes,
and the Assign Table scrolls to reflect the change.
The parameter item assigned to the selected Control Change
number will appear next to it in the Assign Table.
Control Change Assign Table Notes
The“Control Change To Control Parameters Assignment Tables” on
page 211.
To reset the assignments to their initial settings, press the [SYSTEM]
key six times or until it displays the 6:INITIALIZE function page. Turn
the EQ/LO GAIN rotary control to set the INIT ITEM parameter to
“CTL TBL,” and press the
[ENTER] key. For more information, see “Ini-
tializing the VM200” on page 197.
You can store the Control Change Assign Table to an external MIDI
device, such as a MIDI data filer, using MIDI Bulk Dump. (See “Bulk
Dump” on page 179 for more information.)
If a parameter is assigned to two or more control changes, the lowest
control change is transmitted when the parameter is recalled.