Fostex VM200 - Manual (Page 54)

Getting Started
54 VM200 User’s Guide
Adjusting the EQ
9. Press the channel 1 [EQ EDIT] key.
The [EQ EDIT] key lights up orange, and the [EQ ON] key in the
Selected EQ section lights up green.
If the [EQ ON] key is not lit, press the key to turn it on.
The following EQ EDIT function page appears.
10.
Use the EQ Gain, Freq, and Q rotary controls to adjust the
channel 1 EQ.
Each trio of rotary controls adjusts the EQ in a separate fre-
quency band. Use all 12 rotary controls to adjust the channel 1
EQ in each of the four bands.
For example, watch the response curve swell as you raise the
EQ/HI-MID Gain, as illustrated in figures A and B below.
A
B
the response curve swells when Gain is raised