Fostex VM200 - Manual (Page 13)

Mixer Functions
VM200 User’s Guide 13
Mixer Functions
❑ Scene Memory (up to 100 scenes)
❑ 3 Preset Scenes (INIT, RECORDING, MIXDOWN)
❑ 60mm continuous motorized faders
❑ Stopless rotary controls
❑ 4-band parametric EQ for channels 1-16
❑ Dual internal effects processors
❑ EQ Library with 50 Presets plus 50 memory locations for custom-
ized EQ programs
❑ Effect Library featuring 50 Preset effect programs, and memory
locations for 50 user-customized effect programs
❑ The ADAT DIRECT send function enables you to assign input chan-
nel 1-8 signals to ADAT 1-8 (and turn any channel on or off).
❑ You can pair adjacent (odd-even) input channels.
❑ You can pair AUX SEND 1 and 2, and AUX SEND 3 and 4.
❑ Three Fader groups (A, B, C)
❑ Three Mute groups (A, B, C)
❑ Channel Copy function copies parameter settings, including mute
group and fader group information, from one channel to another
❑ EQ Copy function copies EQ settings from one channel to another.
❑ LED-segment meter displays ST BUSS OUT level
❑ LCD meter displays levels for 20 input channels or 18 output chan-
nels
❑ Two Solo modes, PFL and MIX-SOLO, enable you to monitor signals
pre-fader or post-fader
❑ Large 256x64 dot resolution LCD Display
MIDI functions
❑ You can use Program Change messages to recall scenes (Presets
and User tables)
❑ You can use Control Change messages to control mixer parameters
(Presets and User tables)
❑ You can use System Exclusive messages to control mixer parame-
ters
❑ You can output MIDI Machine Code (MMC) by pressing keys on the
control panel
❑ MIDI Bulk Dump capability for data backup and transfer