Fostex VM200 - Manual (Page 131)

Viewing and Adjusting the Effect Send Master Level
VM200 User’s Guide 131
The VM200 displays the 1:CH VIEW function page, which includes
graphic and numeric indicators of the effect send levels for EFF1
and EFF2.
2.
If you wish to adjust the effect send level, specify a channel
whose fader you wish to use by pressing a Page Select key and
the
[EQ EDIT] key for the channel.
The VM200 displays a new channel number in the CH section,
near the upper-left corner of the display.
3.
Press the EFF1 or EFF2 key in the Fader Mode section to
specify an effects processor.
The selected key flashes.
4.
Raise the fader for the corresponding channel.
The graphic fader and numerical read-out on the display reflect
the adjustment in real-time.
Viewing and Adjusting the Effect Send Master Level
You can control Effect Send master levels using the Master fader in
the appropriate Fader Mode.
1.
Press the [EFF1] or [EFF2] key in the Fader Mode section to
specify the effects processor you wish to adjust.
The selected key flashes.
2.
Raise or lower the Master fader to adjust the Effect Send mas-
ter level.
The Effect Sends master level is displayed on the output channel
page of the
CHANNEL EDIT function page (also called the “ CHANNEL
EDIT/OUTPUT ” function page).
effect send fader level
channel number
effect send master level