Fostex VM200 - Manual (Page 168)

Digital Connections
168 VM200 User’s Guide
S/P DIF IN/OUT
The VM200 features S/P DIF digital in and out connectors on the rear
panel.
“S/PDIF” is an abbreviation for the Sony/Philips Digital InterFace, a
digital format that enables two channels of digital audio to flow
through an RCA connector (coaxial) or an optical cable. The VM200
requires an optical S/P DIF connection.
Using S/P DIF OUT
The VM200 outputs the ST BUSS signal in digital S/P DIF format
from the S/P DIF Out optical connector on the rear panel.
You can connect this output to any digital device that features an
S/P DIF Optical input, such as a DAT recorder or MiniDisc recorder
to mixdown in stereo.
You can also connect the S/P DIF out to the S/P DIF IN of another
VM200 in a cascade configuration. See “Cascading the VM200” on
page 171 for more information.
In this example, the VM200 S/P DIF output is connected to the digital
input of a DAT recorder for digital mixdown recording.
The VM200 serves as the word clock master; the DAT is a word clock
slave. Set the “Master Word Clock” parameter on the V200 to “INT44.”
Refer to “Setting the Master Word Clock” on page 162 for more infor-
mation.
If you select the digital input on the DAT recorder as the recording
source, the DAT should automatically synchronize to the word clock
signal from the VM200. On some DAT recorders, you may need to
specify the word clock source. Refer to the instructions supplied with
your DAT recorder.
Note: If the connected digital device has only the COAXIAL (RCA pin)
jack as a digital input, use a Fostex COP-1 (an optical-to-coaxial con-
verter).
OUT IN
S/P DIF
S/P DIF OUT
DIGITAL IN
.
optical cable
DAT
INPUT 4 INPUT 3 INPUT 2 INPUT 1
PAD 26dB
A B PAD 26dB
A B PAD 26dB
A B PAD 26dB
A B
-16 -60 +10 -34 -16 -60 +10 -34 -16 -60 -16 -60
TRIM TRIM TRIM TRIM
DIGITAL RECORDING MIXER
VM200
SCENE MEMORY REC BUSS
EFF EDIT SELECTED EQ EQ/HI EQ/HI-MID EQ/LO-MID EQ/LO SETUP
CURRENT SCENE STATUS
KEY MODE
+10
0
-10
-20 -30 -40
-
+10
0
-10
-20 -30 -40
-
+10
0
-10
-20 -30 -40
-
+10
0
-10
-20 -30 -40
-
+10
0
-10
-20 -30 -40 -
+10
0
-10
-20 -30 -40 -
+10
0
-10
-20 -30 -40 -
16 8
GAIN
FREQ
PAN
Q
PAN
ON ON ON ON ON ON ON
SOLO SOLO SOLO SOLO SOLO SOLO SOLO
EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT
SOLO
ON ON
SOLO
EQ LIBRARY STORE RECALL
EQ ON
EFF LIBRARY STORE RECALL
EFF2 EFF1
STORE RECALL SOLO
+1/ /-1
DATA EXIT
ENTER
MASTER 15 7 14 6 13 5 12 4 11 3 10 2 9 1 20 19 18 17
FREQ Q FREQ Q FREQ Q
GAIN GAIN GAIN
1-8 ANALOG IN 9-16 ADAT IN 17-20 EFF RTN PAGE SELECT
SYSTEM MIDI
PHASE GROUP ROUTING/ PAIR/
CH VIEW METER CHANNEL/
AUX1 FADER MODE AUX2
AUX3 AUX4
EFF1 EFF2
CHANNEL
ADD.AUX
TRIM
-10 -50
TRIM TRIM TRIM
-10 -50 -10 -50 -10 -50
INPUT 5 INPUT 6 INPUT 7 INPUT 8
MIN MAX
GAIN
MAX MIN
GAIN
2TRK IN
PHONES MONITOR
+10
0
-10
-20 -30 -40 -
EFF RTN ADAT IN ANALOG IN
0
-10
-20
-30
-60
-
-40
MMC SEND
PAN PAN PAN PAN PAN PAN
-48 -36 -24 -18 -12 -9 -6 -3 OL
ST BUSS/SOLO L R
METER
+10 -34 +10 -34