Mmc (midi machine control) send, Setting the device id number, Entering mmc send mode – Fostex VM200 User Manual
Page 192: Solo
VM200 & MIDI
192
VM200 User’s Guide
MMC (MIDI Machine Control) Send
MMC is an abbreviation for MIDI Machine Control. You can control
MMC-compatible recorders from the VM200 by sending MIDI
Machine Control (MMC) commands.
In MMC Send mode, the VM200’s
[ON]
keys 1 through 8 function as
the transport keys, store, recall keys for locate memories.
You can use the
[EQ EDIT]
keys and
[SOLO]
keys to locate sixteen
definable locate points (LOCATE 1–16).
While you hold down the [ENTER] key, the
[SOLO]
keys function as
the record track select keys. MMC commands are transmitted via
MIDI.
The following example illustrates remote control of an MMC-compat-
ible digital MTR (such as the Fostex VR800) from the VM200 using
MMC commands.
Setting the Device ID Number
1.
Press the
[MIDI]
key.
The VM200 displays the 1:MIDI TX&RX function page.
2.
Select an ID number for the DevID parameter.
Rotate the EQ/LO-MID Freq rotary control to specify the device ID
number of the connected digital MTR. Select a number from 000
to 126.
Entering MMC Send Mode
3.
Press the
[ROUTING/PHASE]
key and the
[PAIR/GROUP]
key
simultaneously to enter MMC Send mode.
ADAT OUT
ADAT IN
ADAT IN
ADAT OUT
ADAT-compatible Digital multitrack recorder
MIDI Machine Control Data
MIDI IN
SHIFT
P.EDIT
LOC MEM
RECORD
STOP
PLAY
REW
F FWD
AUTO PUNCH
CLIPBOARD
AUTO RTN
OUT
IN
END
OUT
IN
START
EJECT
ACCESS
5
6
7
8
OL
24
12
6
0
1
2
3
4
RECORD TRACK
4
3
2
1
5
6
7
8
EXECUTE
/ YES
EXIT
/ NO
DISP SEL
UNDO / REDO
EDIT
HOLD/
STORE
SETUP
JOG
VARI PITCH
SCRUB
LOCATE
AUTO PLAY
PGM SEL
AUTO RTN
TIME BASE SEL
SHUTTLE
LOCATE REC END
LOCATE ABS 0
CLIPBOARD PLAY
PUNCH
AUTO
OPTICAL
A SYNC
PREVIEW