Fortinet MR1 - Manual (Page 148)

148
Syntax
snmp-server enable traps authentication
no snmp-server enable traps authentication
no - This command disables the Authentication trap.
Default Setting
Enabled
Command Mode
Global Config
This command enables the DVMRP trap.
Syntax
snmp-server enable traps dvmrp
no snmp-server enable traps dvmrp
no - This command disables the DVMRP trap.
Default Setting
Enabled
Command Mode
Global Config
This command enables Link Up/Down traps for the entire switch. When enabled, link traps
are sent only if the Link Trap flag setting associated with the port is enabled (see ‘snmp trap
link-status’ command).
Syntax
snmp-server enable traps linkmode
no snmp-server enable traps linkmode
no - This command disables Link Up/Down traps for the entire switch.