Fortinet MR1 - Manual (Page 273)

273
• Classes
• Policies
• Services
This information can be displayed in either summary or detailed formats. The status
information is only shown when the DiffServ administrative mode is enabled; it is suppressed
otherwise. There is also a 'show' command for general DiffServ information that is available
at any time.
5.12.5.1 show class-map
This command displays all configuration information for the specified class.
Syntax
show class-map [<classname>]
<classname> is the name of an existing DiffServ class.
Default Setting
None
Command Mode
Privileged EXEC and User EXEC
Display Message
Class Name The name of this class.
Class Type The class type (all, any, or acl) indicating how the match criteria are evaluated
for this class. A class type of all means every match criterion defined for the class is
evaluated simultaneously they must all be true to indicate a class match. For a type of any
each match criterion is evaluated sequentially and only one need be true to indicate a class
match. Class type acl rules are evaluated in a hybrid manner, with those derived from each
ACL Rule grouped and evaluated simultaneously, while each such grouping is evaluated
sequentially.
Match Criteria The Match Criteria fields will only be displayed if they have been configured.
They will be displayed in the order entered by the user. These are evaluated in accordance
with the class type. The possible Match Criteria fields are: Class of Service, Destination IP
Address, Destination Layer 4 Port, Destination MAC Address, Every, IP DSCP, IP