Fortinet MR1 - Manual (Page 373)

373
<vrid> - Virtual router ID.
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
VRID Represents the router ID of the virtual router.
Primary IP Address This field represents the configured IP Address for the Virtual router.
VMAC address Represents the VMAC address of the specified router.
Authentication type Represents the authentication type for the specific virtual router.
Priority Represents the priority value for the specific virtual router.
Advertisement interval Represents the advertisement interval for the specific virtual router.
Pre-Empt Mode Is the preemption mode configured on the specified virtual router.
Administrative Mode Represents the status (Enable or Disable) of the specific router.
State Represents the state (Master/backup) of the specific virtual router
6.9.1.4 show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the
switch.
Syntax
show ip vrrp interface stats <slot/port> [ <vrid>]
<slot/port> - Valid slot and port number separated by a forward slash.
<vrid> - Virtual router ID.
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
VRID Represents the router ID of the virtual router.
Uptime Is the time that the virtual router has been up, in days, hours, minutes and seconds.
Protocol Represents the protocol configured on the interface.
State Transitioned to Master Represents the total number of times virtual router state has changed to
MASTER.
Advertisement Received Represents the total number of VRRP advertisements received by this virtual
router.
Advertisement Interval Errors Represents the total number of VRRP advertisements received for which
advertisement interval is different than the configured value for this virtual
router.