Fortinet MR1 User Manual
Page 640
640
Group Address - The group address transmitted in Candidate-RP-Advertisements.
Group Mask - The group address mask transmitted in Candidate-RP-Advertisements to fully identify the
scope of the group which the router will support if elected as a Rendezvous Point.
Address - Displays the unicast address of the interface which will be advertised as a Candidate RP.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
Configuring PIM-SM Static RP Configuration Page
Configurable Data
IP Address - IP Address of the RP to be created or deleted.
Group - Group Address of the RP to be created or deleted.
Group Mask - Group Mask of the RP to be created or deleted.
Command Buttons
Submit - Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a save
is performed.
Delete - Attempts to remove the specified static RP IP Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a save
is performed.