Fortinet MR1 - Manual (Page 56)

56
Command Mode
Privileged Exec
Display Message
The display parameters when the argument is ' <slot/port>' are as follows:
Total Packets Received (Octets): The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including FCS octets). This object can be used as a
reasonable estimate of Ethernet utilization. If greater precision is desired, the etherStatsPkts and
etherStatsOctets objects should be sampled before and after a common interval. The result of this
equation is the value Utilization which is the percent utilization of the Ethernet segment on a scale of 0 to
100 percent.
Packets Received 64 Octets: The total number of packets (including bad packets) received that were
64 octets in length (excluding framing bits but including FCS octets).
Packets Received 65-127 Octets: The total number of packets (including bad packets) received that
were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
Packets Received 128-255 Octets: The total number of packets (including bad packets) received that
were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Packets Received 256-511 Octets: The total number of packets (including bad packets) received that
were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Packets Received 512-1023 Octets: The total number of packets (including bad packets) received that
were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
Packets Received 1024-1518 Octets: The total number of packets (including bad packets) received
that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received > 1522 Octets: The total number of packets received that were longer than 1522
octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
Packets RX and TX 64 Octets: The total number of packets (including bad packets) received that were
64 octets in length (excluding framing bits but including FCS octets).
Packets RX and TX 65-127 Octets: The total number of packets (including bad packets) received that
were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
Packets RX and TX 128-255 Octets: The total number of packets (including bad packets) received that
were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
Packets RX and TX 256-511 Octets: The total number of packets (including bad packets) received that
were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
Packets RX and TX 512-1023 Octets: The total number of packets (including bad packets) received
that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets RX and TX 1024-1518 Octets: The total number of packets (including bad packets) received
that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets RX and TX 1519-1522 Octets: The total number of packets (including bad packets) received
that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets RX and TX 1523-2047 Octets: The total number of packets (including bad packets) received
that were between 1523 and 2047 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets RX and TX 2048-4095 Octets: The total number of packets (including bad packets) received
that were between 2048 and 4095 octets in length inclusive (excluding framing bits but including FCS
octets).
Packets RX and TX 4096-9216 Octets: The total number of packets (including bad packets) received
that were between 4096 and 9216 octets in length inclusive (excluding framing bits but including FCS
octets).