Fortinet MR1 - Manual (Page 155)

155
Default Setting
None
Command Mode
Privileged Exec
Display Message
HTTP Mode (Unsecure): This field indicates whether the HTTP mode is enabled or disabled.
HTTP Port: This field specifies the port configured for HTTP.
HTTP Mode (Secure): This field indicates whether the administrative mode of secure HTTP is enabled or
disabled.
Secure Port: This field specifies the port configured for SSLT.
Secure Protocol Level(s): The protocol level may have the values of SSL3, TSL1, or both SSL3 and
TSL1.
5.3.6.2 ip javamode
This command specifies whether the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed
from the Web interface. When access is disabled, the user cannot view the Java applet.
Syntax
ip javamode
no ip javamode
no - This command disallows access to the Java applet in the header frame of the Web interface. When
access is disabled, the user cannot view the Java applet.
Default Setting
Enabled
Command Mode
Global Config
5.3.6.3 ip http port
This command is used to set the http port where port can be 1-65535 and the default is port 80.