Fortinet MR1 - Manual (Page 160)

160
5.3.7.4 ip ssh maxsessions
This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0
to 5.
Syntax
ip ssh maxsessions <0-5>
no ip ssh maxsessions
<0-5> - maximum number of sessions.
no - This command sets the maximum number of SSH connection sessions that can be established to the
default value.
Default Setting
SSH1 and SSH2
Command Mode
Global Config
5.3.7.5 ip ssh timeout
This command sets the SSH connection session timeout value, in minutes. A session is
active as long as the session has been idle for the value set. A value of 0 indicates that a
session remains active indefinitely. The time is a decimal value from 0 to 160. Changing the
timeout value for active sessions does not become effective until the session is reaccessed.
Any keystroke will also activate the new timeout duration.
Syntax
ip ssh timeout <1-160>
no ip ssh timeout