Fortinet MR1 - Manual (Page 275)

275
Class Rule Table Size Current/Max The current or maximum number of entries (rows) in
the Class Rule Table.
Policy Table Size Current/Max The current or maximum number of entries (rows) in the
Policy Table.
Policy Instance Table Size Current/Max The current or maximum number of entries (rows)
in the Policy Instance Table.
Policy Attribute Table Size Current/Max The current or maximum number of entries (rows)
in the Policy Attribute Table.
Service Table Size Current/Max The current or maximum number of entries (rows) in the
Service Table.
5.12.5.3 show policy-map
This command displays all configuration information for the specified policy.
Syntax
show policy-map [<policy-map-name>]
<policy-map-name> is the name of an existing DiffServ policy.
Default Setting
None
Command Mode
Privileged EXEC
Display Message
Policy Name The name of this policy.
Policy Type The policy type, namely whether it is an inbound or outbound policy definition.
The following information is repeated for each class associated with this policy
(only those policy attributes actually configured are displayed):
Class Name The name of this class.
Mark CoS Denotes the class of service value that is set in the 802.1p header of outbound
packets. This is not displayed if the mark cos was not specified.
Mark IP DSCP Denotes the mark/re-mark value used as the DSCP for traffic matching this
class. This is not displayed if mark ip description is not specified using the police-two-rate
command, or if policing is in use for the class under this policy.