Fortinet MR1 - Manual (Page 216)

216
Default Setting
None
Command Mode
Global Config
5.8.4.3 radius-sever key
This command is used to configure the shared secret between the RADIUS client and the
RADIUS accounting / authentication server. Depending on whether the 'auth' or 'acct' token
is used, the shared secret will be configured for the RADIUS authentication or RADIUS
accounting server. The IP address provided must match a previously configured server.
When this command is executed, the secret will be prompted. The secret must be an
alphanumeric value not exceeding 20 characters.
Syntax
radius-server key {acct | auth} <ipaddr>
<ipaddr> - is a IP address.
Default Setting
None
Command Mode
Global Config
5.8.4.4 radius-server retransmit
This command sets the maximum number of times a request packet is re-transmitted when
no response is received from the RADIUS server. The retries value is an integer in the range
of 1 to 15.
Syntax
radius-server retransmit <retries>