Fortinet MR1 - Manual (Page 205)

205
None
Command Mode
Privileged Exec
Display Message
MAC address Statically locked MAC address.
This command displays the source MAC address of the last packet that was discarded on a
locked port.
Syntax
show port-security violation <slot/port>
Default Setting
None
Command Mode
Privileged Exec
Display Message
MAC address MAC address of discarded packet on locked ports.
5.8.2 Configuration Commands
5.8.2.1 authentication login
This command creates an authentication login list. The <listname> is up to 15 alphanumeric
characters and is not case sensitive. Up to 10 authentication login lists can be configured on
the switch. When a list is created, the authentication method “local” is set as the first method.
When the optional parameters “method1”, “method 2”, and/or “method 3” are used, an
ordered list of methods are set in the authentication login list. If the authentication login list
does not exist, a new authentication login list is first created and then the authentication
methods are set in the authentication login list. The maximum number of authentication login
methods is three. The possible method values are local, radius, reject, and tacacs.