Fortinet MR1 - Manual (Page 475)

475
Unicast Poll Retry - Specifies the number of times to retry a request to an SNTP server after the first
time-out before attempting to use the next configured server when configured in unicast mode. Allowed
range is (0 to 10). Default value is 1.
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
Viewing SNTP Global Status Page
Non-Configurable Data
Version - Specifies the SNTP Version the client supports.
Supported Mode - Specifies the SNTP modes the client supports. Multiple modes may be supported
by a client.
Last Update Time - Specifies the local date and time (UTC) the SNTP client last updated the system
clock.
Last Attempt Time - Specifies the local date and time (UTC) of the last SNTP request or receipt of an
unsolicited message.
Last Attempt Status - Specifies the status of the last SNTP request or unsolicited message for both
unicast and broadcast modes. If no message has been received from a server, a status of Other is
displayed. These values are appropriate for all operational modes.
• OtherNone of the following enumeration values.
• SuccessThe SNTP operation was successful and the system time was updated.
• Request Timed OutA directed SNTP request timed out without receiving a response from
the SNTP server.
• Bad Date EncodedThe time provided by the SNTP server is not valid.
• Version Not SupportedTheSNTP version supported by the server is not compatible with
the version supported by the client.
•
Server UnsychronizedThe SNTP server is not synchronized with its peers. This is indicated
via the 'leap indicator' field on the SNTP message.