Fortinet MR1 User Manual
Page 592
592
Viewing IP Access Control List Summary Page
Non-Configurable Data
IP ACL ID - The IP ACL identifier.
Rules - The number of rules currently configured for the IP ACL.
Direction - The direction of packet traffic affected by the IP ACL.
Direction can only be:
Inbound
Slot/Port(s) - The interfaces to which the IP ACL applies.
Command Buttons
Refresh - Refresh the data on the screen to the latest state.
Configuring IP Access Control List Rule Configuration Page
Use these screens to configure the rules for the IP Access Control Lists created
using the IP Access Control List Configuration screen. What is shown on this screen
varies depending on the current step in the rule configuration process. A
Standard/Extended IP ACL must first be selected to configure rules for. The rule
identification, and the 'Action' and 'Match Every' parameters must be specified next.
If 'Match Every' is set to false a new screen will then be presented from which the
match criteria can be configured.