Fortinet MR1 - Manual (Page 238)

238
Command Mode
Privileged Exec
5.11.1.4 clear logging buffered
This command is used to clear the message log maintained by the switch. The message log
contains system trace information.
Syntax
clear logging buffered
Default Setting
None
Command Mode
Privileged Exec
5.11.1.5 clear config
This command resets the configuration to the factory defaults without powering off the switch.
The switch is automatically reset when this command is processed. You are prompted to
confirm that the reset should proceed.
Syntax
clear config
Default Setting
None
Command Mode
Privileged Exec