Fortinet MR1 - Manual (Page 226)

226
show cdp
Default Setting
None
Command Mode
Privileged Exec
Display Message
CDP Admin Mode: CDP enable or disable
CDP Holdtime (sec): The length of time a receiving device should hold the FortiSwitch-100 CDP
information before discarding it
CDP Transmit Interval (sec): A period of the FortiSwitch-100 to send CDP packet
Ports: Port number vs CDP status
CDP: CDP enable or disable
5.9.1.2 show cdp neighbors
This command displays the CDP neighbor information.
Syntax
show cdp neighbors
Default Setting
None
Command Mode
Privileged Exec
Display Message
Device Id: Identifies the device name in the form of a character string.
Local Interface: The CDP neighbor information receiving port.
Holdtime: The length of time a receiving device should hold CDP information before discarding it.
Capability: Describes the device's functional capability in the form of a device type, for example, a switch.
Platform: Describes the hardware platform name of the device, for example, Fortinet FortiSwitch-100.
Port Id: Identifies the port on which the CDP packet is sent.