Fortinet MR1 - Manual (Page 289)

289
support independent per-port class of service mappings. If specified, the 802.1p mapping
table of the interface is displayed. If omitted, the most recent global configuration settings are
displayed.
Syntax
show queue cos-map <slot/port>
< slot/port > The interface number.
Default Setting
None
Command Mode
Privileged EXEC, User EXEC
Display Message
The following information is repeated for each user priority.
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user priority value is mapped.
5.14.1.2 show queue ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Syntax
show queue ip-precedence-mapping <slot/port>
< slot/port > The interface number.
Default Setting
None