Fortinet MR1 - Manual (Page 435)

435
select a method that does not time out as the second method, the third method will not be tried. Note that
this parameter will not appear when you first create a new login list.
Method 3 - Use the dropdown menu to select the method, if any, that should appear third in the selected
authentication login list. Note that this parameter will not appear when you first create a new login list.
Command Buttons
Submit - Sends the updated screen to the switch and causes the changes to take effect on the switch.
These changes will not be retained across a power cycle unless you perform a save.
Delete - Remove the selected authentication login list from the configuration. The delete will fail if the
selected login list is assigned to any user (including the default user) for system login or IEEE 802.1x port
access control. You can only use this button if you have Read/Write access. The change will not be
retained across a power cycle unless you perform a save.
Viewing Login Session Page
Non-Configurable Data
ID - Identifies the ID of this row.
User Name - Shows the user name of user who made the session.
Connection From - Shows the IP from which machine the user is connected.
Idle Time - Shows the idle session time.
Session Time - Shows the total session time.
Session Type – Shows the type of session: telnet, serial or SSH.
Command Buttons
Refresh - Update the information on the page.