Fortinet MR1 - Manual (Page 279)

279
The following information is repeated for each class instance within this policy:
Class Name The name of this class instance.
In Offered Octets/Packets A count of the octets/packets offered to this class instance
before the defined DiffServ treatment is applied. Only displayed for the 'in' direction.
In Discarded Octets/Packets A count of the octets/packets discarded for this class
instance for any reason due to DiffServ treatment of the traffic class. Only displayed for the
'in' direction.
Tail Dropped Octets/Packets A count of the octets/packets discarded due to tail dropping
from a transmission queue, typically due to the effects of traffic shaping. These counts may
not be supported on all platforms. Only displayed for the 'out' direction.
Random Dropped Octets/Packets A count of the octets/packets discarded due to WRED
active queue depth management, typically due to the effects of traffic shaping. These counts
are only applicable for a class instance whose policy attributes includes random dropping,
and may not be supported on all platforms. Only displayed for the 'out' direction.
Shape Delayed Octets/Packets A count of the octets/packets that were delayed due to
traffic shaping. These counts are only applicable for a class instance whose policy attributes
includes shaping, and may not be supported on all platforms. Only displayed for the 'out'
direction.
Sent Octets/Packets A count of the octets/packets forwarded for this class instance after
the defined DiffServ treatment was applied. In this case, forwarding means the traffic stream
was passed to the next functional element in the data path, such as the switching or routing
function or an outbound link transmission element. Only displayed for the 'out' direction.
Note: None of the counters listed here are guaranteed to be supported on all platforms. Only
supported counters are shown in the display output.
5.12.5.7 show service-policy
This command displays a summary of policy-oriented statistics information for all interfaces
in the specified direction. The direction parameter indicates the interface direction of interest.
This command enables or disables the route reflector client. A route reflector client relies on
a route reflector to re-advertise its routes to the entire AS. The possible values for this field
are enable and disable.
Syntax
show service-policy [in]
Command Mode