Fortinet MR1 - Manual (Page 416)

416
Disbaled
Command Mode
Global Config
7.5.2.2 ip pimsm message-interval
This command is used to configure the global join/prune interval for PIM-SM router. The
join/prune interval is specified in seconds. This parameter can be configured to a value from
10 to 3600.
Syntax
ip pimsm message-interval <10 - 3600>
no ip pimsm message-interval
<10 - 3600> - This is time interval in seconds.
no - This command is used to reset the global join/prune interval for PIM-SM router to the default value.
Default Setting
60
Command Mode
Global Config
7.5.2.3 ip pimsm register-rate-limit
This command is used to configure the Threshold rate for the RP router to switch to the
shortest path. The rate is specified in Kilobytes per second. The possible values are 0 to
2000.
Syntax
ip pimsm register-rate-limit <0 - 2000>
no ip pimsm register-rate-limit
<0 - 2000> - This is time interval in seconds.