Fortinet MR1 - Manual (Page 208)

208
5.8.3 Dot1x Configuration Commands
5.8.3.1 dot1x initialize
This command begins the initialization sequence on the specified port. This command is only
valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error
will be returned.
Syntax
dot1x initialize <slot/port>
<slot/port> - is the desired interface number.
Default Setting
None
Command Mode
Privileged Exec
5.8.3.2 dot1x default-login
This command assigns the authentication login list to use for non-configured users for
802.1x port security. This setting is over-ridden by the authentication login list assigned to a
specific user if the user is configured locally. If this value is not configured, users will be
authenticated using local authentication only.
Syntax
dot1x defaultl-login <listname>
<listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config