Fortinet MR1 - Manual (Page 374)

374
Authentication Failure Represents the total number of VRRP packets received that don't pass the
authentication check.
IP TTL errors Represents the total number of VRRP packets received by the virtual router with IP TTL (time
to live) not equal to 255.
Zero Priority Packets Received Represents the total number of VRRP packets received by virtual router
with a priority of '0'.
Zero Priority Packets Sent Represents the total number of VRRP packets sent by the virtual router with a
priority of '0'
Invalid Type Packets Received Represents the total number of VRRP packets received by the virtual
router with invalid 'type' field.
Address List Errors Represents the total number of VRRP packets received for which address list does
not match the locally configured list for the virtual router.
Invalid Authentication Type Represents the total number of VRRP packets received with
unknown authentication type.
Authentication Type Mismatch Represents the total number of VRRP advertisements received for which
'auth type' not equal to locally configured one for this virtual router.
Packet Length Errors Represents the total number of VRRP packets received with packet length less than
length of VRRP header.
6.9.2 Configuration Commands
6.9.2.1 ip vrrp
This command enables the administrative mode of VRRP in the router.
Syntax
ip vrrp
no ip vrrp
Default Setting
Disabled
Command Mode
Global Config
This command sets the virtual router ID on an interface for Virtual Router configuration in the
router.
Syntax