Fortinet MR1 User Manual

Page 33

Advertising
background image

33

show ip interface

Displays the Network Configurations
IP Address - IP Address of the interface
Default IP is 0.0.0.0
Subnet Mask - IP Subnet Mask for the
interface
Default is 0.0.0.0
Default Gateway - The default Gateway for
this interface
Default value is 0.0.0.0
Burned in MAC Address - The Burned in
MAC Address used for inband connectivity
Network Configurations Protocol Current -
Indicates which network protocol is being
used
Default is none
Management VLAN Id - Specifies VLAN id
Web Mode - Indicates whether HTTP/Web is
enabled.
Java Mode - Indicates whether java mode is
enabled.

ip address

(Config)#interface vlan 1
(if-vlan 1)#ip address <ipaddr> <netmask>
(if-vlan 1)#exit
(Config)#ip default-gateway <gateway>

IP Address range from 0.0.0.0 to
255.255.255.255
Subnet Mask range from 0.0.0.0 to
255.255.255.255
Gateway Address range from 0.0.0.0 to
255.255.255.255
Displays all of the login session information

2.4.5 Quick Start up Uploading from Switch to
Out-of-Band PC (Only XMODEM)


Table 2-5. Quick Start up Uploading from Switch to Out-of-Band PC (XMODEM)

Command Details

copy startup-config <filename>
xmodem

This starts the upload and displays the mode
of uploading and the type of upload it is and
confirms the upload is taking place.
For example:
If the user is using HyperTerminal, the user
must specify where the file is going to be
received by the pc.

Advertising