Fortinet MR1 - Manual (Page 306)

306
<ipaddr> - The IP address to be removed from the ARP table.
Default Setting
None
Command Mode
Privileged Exec
6.1.2.6 arp resptime
This command configures the ARP request response timeout.
Syntax
arp resptime <1-10>
no arp resptime
<1-10> - The range of default response time is 1 to 10 seconds.
no - This command configures the default response timeout time.
Default Setting
The default response time is 1.
Command Mode
Global Config
6.1.2.7 arp retries
This command configures the ARP count of maximum request for retries.
Syntax
arp retries <0-10>
no arp retries
<0-10> - The range of maximum request for retries is 0 to 10.
no - This command configures the default count of maximum request for retries.
Default Setting
The default value is 4.
Command Mode
Global Config