FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 148)

148 iRMC S2/S3
System Information - Information on the server
System Status
The status of the global error LED, the CSS LED and the identification LED are
shown under
System Status . You can also switch the PRIMERGY identification
LED on and off.
Figure 67: System Overview page - System Status
Power LED
Power status of the server.
The following statuses are possible:
– On: “Power ON” (green)
– On: “Standby mode (green) with text “Suspend to RAM (Standby)”.
– Off: “Power OFF” (orange)
Error LED
Informs about the server‘s Global Error LED:
CSS LED
Informs about the server’s CSS (Customer Self Service) LED:
Status Info
(iRMC S2/S3) Global Error LED
on the Server Status of the servers
off does not light up. No critical event.
on lights red. Prefailure event for a non CSS component.
blinking flashes red. Critical event.
Status Info
(iRMC S2/S3) CSS LED on the
Server Status of the server
off does not light up. The server is operational.
on lights orange. Prefailure event for a CSS component.
blinking flashes orange. Defective CSS component.