FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 194
194
iRMC
S2/S3
Power Management
0 Watt Technology
I
Please note:
–
This feature is only supported by the iRMC S3.
–
This feature is not supported for all PRIMERGY servers.
The "0 Watt Technology" feature allows you to reduce the server’s standby
power consumption to 0 watts. Every time the server is powered off, the server’s
standby power consumption is reduced to 0 Watt (
0 Watt
mode).
I
In the
0 Watt
mode, the server can no longer be managed remotely. The
server can only be powered on by pressing the
Power
button or the
PSU
Primary Resume
button.
However, by applying the
Scheduled
option (see
) you can
specify a time interval at which the PSU is awoken from
0 Watt
mode and
thus both remote management and Wake-on-LAN (WOL) can be used.
Figure 107: Power Options page, 0 Watt Technology
Disabled
Disables
0 Watt
mode and remains in / switches to the standard power
on/off mode. The server can be managed remotely at any time.