FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 59)

iRMC S2/S3 59
Configuring and using the serial interface of the iRMC S2/S3
The following values are not shown in the menu and are preset (see
page 62 , “Terminal program (VT100+)”):
Bits per second
9600
Data bits
8
Parity
None .
Stop bits
1
Flow Control
None
Exiting the BIOS / TrustedCore setup utility
Ê Save your settings and exit the BIOS/TrustedCore setup utility.
Ê Continue with section "Testing the LAN interface" on page 47 .