FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 369)

iRMC S2/S3 369
Flash tools
<file1> through <file3>
Specify one or more files to determine which updates are to be made:
The following files are to be selected:
boot<FW-Version>.bin
Updates the bootloader firmware.
dcod<FW-Version>.bin
Updates the runtime firmware.
<SDR-Version>.SDR
Updates the SDR.
I
To update firmware image 2, you must also specify option /4 (see
below).
/4 Updating firmware image 2.
/l [<logfile>]
Outputs error messages to the specified log file. If no logfile is specified,
the output is directed to the
flbmc.log file.
/n No output on the console.
This option has priority over the
/p and /d options.
/np A rotating bar is shown in place of the percentage completion during the
flashing operation.
/d Outputs additional debug information.
/e Emulation mode (for debugging purposes only).
/i Update the inactive firmware.
/h and /?
Outputs help information.