FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 340)

340 iRMC S2/S3
Console Redirection (EMS/SAC)
8.12 Console Redirection (EMS/SAC) -
Start text console redirection
You can start console redirection with the Console Redirection (EMS/SAC) item
from the main menu.
I
Text-based console redirection only works over the LAN with Serial 1.
If console redirection is also to be used while the operating system is
running, the
Serial 1 Multiplexer must be set to System .
I
Use the keyboard shortcut "<ESC>(" or "~." (tilde dot) to exit the text
console.
It is possible that only one of these options will work, depending on the
type of PRIMERGY server used.
8.13 Start a Command Line shell... -
Start a SMASH CLP shell
Start a Command Line shell... in the main menu allows you to start a SMASH CLP
shell. SMASH CLP stands for “Systems Management Architecture for Server
Hardware Command Line Protocol”. This protocol permits a Telnet- or SSH-
based connection between the management station and the managed server.
For further details on SMASH CLP, please refer to
section "Command Line
Protocol (CLP)" on page 343 .
When you select (s) Start a Command Line shell... from the main menu, the
following window appears:
Figure 209: Remote Manager: Start a SMASH CLP shell... menu
Ê Choose (1) Start a SMASH CLP shell... to start the SMASH CLP shell.