FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 356
356
iRMC
S2/S3
iRMC S2/S3 firmware (overview)
Firmware selector
The firmware selector specifies the iRMC S2/S3 firmware to be executed. Every
time the iRMC S2/S3 is reset and restarted, the firmware selector is evaluated
and processing branches to the corresponding firmware.
The firmware selector can have the following values:
I
Depending on the update variant used, the firmware selector is set
differently after the update.
You can query and explicitly set the firmware selector
–
on the
iRMC S2/S3 Information
page of the iRMC S2/S3 web interface
(see
"Running Firmware" on page 166
)
or
–
using the flash tool (see
).
0
Firmware image containing the most recent firmware version
1
firmware image 1
2
firmware image 2
3
Firmware image containing the oldest firmware version
4
Firmware image most recently updated
5
Firmware image that has been updated least recently