FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 93)

iRMC S2/S3 93
Using AVR
Secure Keyboard
If you are connected to the iRMC S2/S3 web interface over an HTTPS
connection, entries at the keyboard are transferred over a secure SSL
connection.
5.2.5 Redirecting the mouse
The mouse pointer on the managed server is moved synchronously with the
mouse on the remote workstation. You configure the mouse redirection settings
in the AVR window under
Mouse Mode in the Preferences menu (see page 108 ).
5.2.5.1 Synchronizing the mouse pointer
When the AVR window is first opened, it is possible that the mouse pointer on
the remote workstation (local mouse pointer) is not yet synchronized with the
mouse pointer on the managed server.
To synchronize the two mouse pointers, use one of the following alternatives
(see
figure 32 on page 94 ):
Ê Click [Mouse Sync] in the menu bar of the AVR window.
Ê Move the local mouse pointer to the top left corner of the AVR window. The
mouse pointer on the managed server automatically follows this movement.
The pointers are synchronized when the two mouse pointers completely
overlap.