Setting up the usb memory stick – FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 357
iRMC S2/S3
357
Setting up the USB memory stick
10.2
Setting up the USB memory stick
I
You do not need the USB memory stick if you update the firmware of the
iRMC S2/S3 in one of the following ways:
–
using the ServerView Update Manager
–
using ServerView Update Manager Express or ASP
–
using the iRMC S2/S3 web interface and TFTP server
Proceed as follows:
Ê
Download the firmware
iRMC Firmware Update for USB Stick
from the
Download section of the Fujitsu Technology Solutions web server to a
directory on your computer.
The ZIP archive
FTS_<spec>.zip
can be found in your download directory.
(The
<spec>
part of the name provides information on the system type,
system board, firmware/SDRR version etc.)
The ZIP archive includes the following files:
–
USBImage.exe
–
iRMC_<Firmware-Version>.exe
–
iRMC_<Firmware-Version>.IMA
Ê
Connect the USB memory stick to your computer.
Ê
Start the file
iRMC_<Firmware-Version>.exe
or the file
USBImag.exe
.
One of the following windows is opened depending on the file you call (see