FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 32)

32 iRMC S2/S3
Changes compared with the previous version
– In addition to the system event log (IPMI SEL), the iRMC S2 now features
an internal event log.
– The iRMC S2 now supports both IPv4 and IPv6 addresses.
– The iRMC S2 now supports the Open DS directory service.
– iRMC S2 Configuration (iRMC S2 firmware settings) can be restored via
the iRMC S2 web interface.
– Email alerting is now also supported for global iRMCS2 user IDs.
● Chapter "5 Advanced Video Redirection (AVR)":
In addition to some minor changes, the menu of the AVR window has been
supplemented with the
Power Control entry, allowing you now to power on /
power down / reboot the server directly from the AVR window.
● Chapter "7 iRMC S2 web interface":
– Power Supply page: The Power Supply Redundancy Configuration feature is
available for some server types.
– System Event Log Content page:
GUI language "German":
Event description and resolutions are described in German.
GUI language "Japanese":
Resolutions are described in Japanese.
– The DNS Configuration page now additionally includes the functionality of
the former DHCP configuration page, which is no longer available.
– New / modified pages corresponding to the new iRMC S2 features
mentioned above.
● Chapter "8 Remote Manager":
New / modified menus corresponding to the new iRMC S2 features internal
event log and IPv6 addressing.
● Chapter "9 Server Configuration Manager":
New / modified menu pages corresponding to the new iRMC S2 features
IPv6 addressing and Open DS support.