FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 211)

iRMC S2/S3 211
Sensors - Check status of the sensors
7.9 Sensors - Check status of the sensors
The “Sensors” entry provides you with pages which allow you to check the
statuses of sensors of the managed server:
– "Fans - Check fans" on page 212 .
– "Temperature - Report the temperature of the server components" on
page 215
.
– "Voltages - Report voltage sensor information" on page 217 .
– "Power Supply - Check power supply" on page 218 .
– "Component Status - Check status of the server components" on page 220 .
To facilitate checking the status, the sensor status is not only shown in the form
of the current value, but also using a color code and a status icon:
Black (font color)/ The measured value is within the normal operational
value range.
Orange (font color)/ The measured value has exceeded the warning
threshold.
System operation is not yet jeopardized.
Red (font color)/ The measured value has exceeded the critical
threshold.
System operation may be jeopardized and there is a
risk of loss of data integrity.
Table 6: Status of the sensors