FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 381)

iRMC S2/S3 381
Installing the operating system
If you have configured the local CD ROM/DVD ROM drive of the managed
server as the installation source, proceed as follows at the remote workstation:
Ê Clear your currently active remote storage connections. For more detailed
information on clearing remote storage connections, see
page 125 .
Ê Remove ServerView Suite DVD 1 from the DVD ROM drive at the remote
workstation.
Ê Insert the Windows installation CD/DVD in this DVD ROM drive.
I
Close the application if autostart is active.
Ê Connect the CD ROM/DVD ROM drive containing the Windows installation
CD/DVD as remote storage (see
page 121 ).
Ê In the Installation Info page of the Installation Manager, click Start installation .
All the installation files are copied to the managed server.
The Installation Manager opens a confirmation dialog page when the copy
operation is complete and prompts you to remove all the storage media from
the removable media drives before the managed server is rebooted.
I
Before rebooting the system, you must in particular shut down all
current remote storage connections.
Ê To shut down all current remote storage connections, proceed as follows:
Ê Start “Remote Storage” (see page 114 ).
The Storage Devices dialog box is displayed with the currently connected
storage devices and a “Safe Remove” indication.
Ê “Safely remove” the storage device, i.e. ensure that no more
applications/programs are accessing the storage media.
Ê Click on Disconnect... to remove all the remote storage connections.
Ê On the confirmation dialog page, click Ok to reboot the managed server.
Once the managed server has rebooted, you can monitor the entire installation
by means of the AVR.