FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 322)

322 iRMC S2/S3
Requirements on the managed server
8.1 Requirements on the managed server
Access via Telnet must be activated for the iRMC S2/S3 (see the section "Ports
and Network Services - Configuring ports and network services" on page 245 ).
I
Access via the Telnet protocol is deactivated by default for security
reasons, as passwords are transmitted in plain text.
I
Since the ServerView Operations Manager does not know the value of
the management port, the Remote Management Frontend works with the
default value.
Since a connection is not automatically established when the Remote
Management Frontend is started, you can correct any nonstandard value
for the management port after the Remote Management Frontend has
been started.