Troubleshooting, Recharging problems – Marantz RC9200 User Manual
Page 56
User Guide
54
Troubleshooting
need the Marantz factory default configuration, you will have to
use RCEdit with a Windows PC to restore it (see page 57).
Remote Control error messages
n
If one of the following error messages occurs, please contact
your Marantz dealer or Marantz customer service:
n
Can’t open configuration file
n
Configuration file error
n
No configuration file found
n
Invalid configuration file version
Tip
The bulletin boards and friendly users at www.remotecentral.com
can often give you help with problems on weekends or in
evenings when your dealer or Marantz technical support may not
be available.
Recharging Problems
The batteries won’t recharge
n
Make sure you are using the rechargeable battery pack included
with your recharging dock and not the AA batteries.
The indicator light flashes
n
Check if the contacts on the recharging dock are clean and free
of obstructions.
n
Make sure the RC9200/5200 lies properly on the dock.
n
Make sure the battery pack is installed properly in your Remote
Control (see page 4).