Intel CHIPSET 820E - Manual (Page 166)

Intel ® 820E Chipset
R
166 Design Guide
The following figure shows the Intel 820E chipset clock length routing guidelines.
Figure 87. Intel ® 820E Chipset Clock Routing Guidelines
1,2
Note:
1. Tie 3V66 clock for MCH to 3V66 clock for AGP connector, to eliminate pin-to-pin skew.
2. These calculations are based on 150-ps/in trace velocity.
3. TBD value derived from PCI Revision 2.2 Specification, which allows for max. ±2-ns clock skew.
CPUCLK to MCH
Y
CPUCLK to SC242
Note: Tie CPUCLK for the MCH to CPUCLK to the SC242, to eliminate pin-to-pin skew.
±0"
Y 5.3"
3V66 clock for
MCH and ICH
±0"
4" Z
PCI clock for ICH ±0"
4" Z
PCI clock for on-board
devices (excluding ICH)
±TBD 3
4" Z
3V66 clock for
AGP slot
Z
PCI clock for
PCI slots
±TBD 3
1.5" Z
820_clk_route